Home
Showroom
   Auction Inventory
   New Boats
   New Outboard Motors
   Used Outboard Motors
   Pre-Owned Boats
   Boat Info
   Outboard Motor Info
Dealer Info
   About Us
   Directions
Dealer Services
   Service Department
   Parts Request
Customer Corner
   Customer Survey
   Testimonials
   Guest Book
Contact Us

 

 

 New E-TEC G2 300hp



Outboard Motors

Fall Sales Event .. 6 Year Full Non-Declining Factory Warranty on All New Evinrude E-TECs, 15-300hp .. Ends October 31st ....

THE STRONGEST COVERAGE AND ONE OF THE LONGEST COVERAGES IN THE INDUSTRY. FACTORY-BACKED

All Evinrude® warranty and extended service contracts are backed by the manufacturer, not sold to third party providers. NON-DECLINING All Evinrude warranty and extended service contracts cover the same components on the last day of coverage that they do on the first day. FULLY TRANSFERABLE This engine is covered for each owner within the coverage period, which will keep re-sale value high. ONE OF THE LONGEST COVERAGES All Evinrude E-TEC® engines receive 6 years of coverage during the 2017 Fall Sales Event.

Evinrude E-TEC is the lowest maintenance outboard available. It has no break-in period, no valves, belts, camshafts or pulleys to replace, and requires no oil changes, ever! Plus, the Evinrude. E-TEC is the only outboard engine that goes 3 years or 300 hours (G2 500 Hrs. or 5 Years) with no dealer scheduled maintenance.



 

 

 

 The All New E-TEC G2 .. 200-300hp ...

 

Evinrude's all new outboard engine that produces up to 75 percent fewer total regulated emissions, with 15 percent better fuel efficiency and 20 percent more torque than leading four-stroke engines. G2 engines, the next generation of Evinrude E-TEC outboard engines.

***With a 5/5/5 warranty – five year engine warranty, five year corrosion warranty and 500 hour no dealer-scheduled maintenance....

The Evinrude E-TEC G2 outboard is said to have the best-in-class torque, fuel efficiency and total emissions. Available this fall at BRP dealers in ranges starting at 200 H.O. to 300 R.A.V.E., the new E-TEC G2 engine offers the first and only customizable look and the only clean rigging and fully integrated digital controls. These innovations will allow consumers to choose the a color-coordinated combination of boat and engine by selecting top and front panels, as well as accent colors that match their boat ..This engine stands alone, in the industry and on the water. Until now, achieving these levels of performance and integration was unheard of. Add to this the fact that this engine produces, by far, the fewest emissions of any outboard engine on the water, and it’s clear to see why the new Evinrude E-TEC G2 engines will change the face of boating.....

For more info or to place an order call Victor: 561-309-7045 or 561-840-151

________________________________________________________________________

To complete the whole package Evinrude even created two propellers specifically for the G2. This is pretty big considering the company has never made a prop that is designed to match the performance the engine is putting out. The RX4 (four blade) and Raker H.O. (three blade) are offered to match any boating situation. Both props are made with Variable Vent Ports to tune hole-shot and acceleration with the twist of a wrench.

_____________________________________________________________________________________________

Specifications Evinrude E-TEC G2:

Horsepower: 200 H.O, 225 H.O, 250 H.O; 225hp, 250hp, 300hp
Engine Type: V6 74 degree E-TEC D.I
Bore x Stroke: 3.854x 3.000 (98 x 76)
Displacement: 3.4L
Gear ratio: 1.85:1
Full Throtttle: 5400-6000rpm
Weight: 253kg .. 558Lbs
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 133A total, 50 net dedicated, 14A@idle
Steering: Integrated hydraulic power steering
Trim Range: -6-15
Tilt range: 81 degree
Shaft Length: 20in, 25in & 30in (not H.O)
Lubrication: Multipoint targeting oiling
Oil Tank Capacity: Integral 7.6l (good for 200 hours), optional bigger free-standing tanks
Recommended Oil: Evinrude/Johnson XD-100
Recommended Fuel: 87 Octane
Warranty: 5-Year, non declining
Dealer Service After 500 hours or 5 years
Emissions Compliance: EPA2013, Carb 3 Star, European Union
Mounting Centers: Minimum 26in

These new outboard motors come with a Five Year Non-declining Limited Domestic Warranty and no scheduled maintenance for three years or 300 hours. No comparable four stroke can match the power speed or torque of the E-TEC. Incredible fuel efficiency with instant start mode. Acoustically tuned air intake and exhaust systems provide whisper quiet operation. NASA developed piston material. E-TEC’S Ultra-Low emissions rating is best in the industry, including four strokes.

Evinrude E-TEC is the lowest maintenance outboard available. It has no break-in period, no valves, belts, camshafts or pulleys to replace, and requires no oil changes, ever! Plus, the Evinrude E-TEC is the only outboard engine that goes 3 years or 300 hours with no dealer scheduled maintenance.





Worldwide & National Shipping Available
USED OUTBOARD MOTORS

All makes models and horse powers:

Evinrude, Johnson, Mercury, Yamaha, Honda and Suzuki. These motors are checked out and serviced with new thermostats installed. The lower units are pressure tested with a new water pump and lube added.


Please check out our new and used outboard motors online.
A.R.G. MARINE
HONDA FOUR STROKE OUTBOARD MOTORS FROM 2 - 225 HORSE POWER....
HONDA FOUR STROKE OUTBOARD MOTORS FROM 2 - 225 HORSE POWER.... New Motor includes a FIVE year non-declining limited factory warranty..... HONDA introduced the first four stroke outboard engine more than forty years ago. Back then they were ahead of their time. Today they are still ahead, leading the way in engineering innovations and precision manufacturing...... ENJOY THE SMOOTH, QUIET, CLEAN, FUEL EFFICIENT PERFORMANCE OF HONDA’S FOUR STROKE TECHNOLOGY..... Call: VICTOR 561 309 7045 OR 561 840 1514

                 

The Yamaha Outboard Motor Advantage

Performance & Reliability


New 2017 Evinrude

E-TECS 25-300hp

 

 

New G2 Series E-TEC

150-300hp


 


New G2 Clean Rigging

 

 Another G2 on it's way to the water

Policies | Privacy | Terms & Conditions | Disclaimer | Site Map